From epoxy primers and epoxy floor coatings, most in 5 kg or 20 kg sets, through PU-cement screeds to polyurea waterproofing membranes: Rayson formulates and specifies every product in Singapore, has it made to that specification by its production partners, tests and releases every batch here, and supplies applicators, contractors and facility teams direct. Need the floor or wet area done? Rayson quotes the job, and an applicator from its network assesses and installs it. Read the data sheet, then request material pricing or an assessment.
System-matched layers · Published technical data · Formulated in Singapore, with support here
10 of the 28 products in the range are epoxy-based, and they do different jobs. FloorGuard is the roller-applied epoxy floor coating; LevelShield is the self-levelling epoxy; PrimeBond supplies the epoxy primers underneath both; PatchBond covers the epoxy repair mortar and thixotropic patching compound; StaticGuard the conductive epoxy finish; and HydroShield the water-based epoxy for occupied buildings.
The other 18 are deliberately not epoxy. Where a floor faces hot wash-down, thermal shock, sunlight or standing water, epoxy is the wrong answer — so the catalogue also carries PU-cement screed, polyurethane finishes, polyurea waterproofing, acrylic and anti-slip systems. Filtering by chemistry is the quickest way to see which is which.
Every product in the epoxy flooring catalogue publishes its full technical data sheet — coverage, mixing ratio, cure schedule and limitations — with no form and no email address.
Six stages cover priming, repair, body coats, finishes, waterproofing membranes and specialist performance — epoxy flooring, PU screed, self-levelling, polyurea waterproofing, anti-slip and ESD. Start with the layer you need.
Create the adhesion bridge between a correctly prepared substrate and the coating system above it.
04 products
Primers & bonding coats
Epoxy and specialist primers that anchor every Rayson system to the substrate — the first step of a coating that lasts.
Rebuild defects, edges, coves and damaged concrete before the protective system is installed.
02 products
Repair mortars & compounds
Epoxy repair mortars and thixotropic epoxy compounds for patching, coving and reinstating damaged concrete before the epoxy floor system goes down.
Form the principal thickness, continuity and mechanical performance of the finished floor.
01 products
Roller-applied epoxy floor coatings
The roller-applied epoxy floor coatings in the range — solvent-free, two-component epoxy that rolls out to a smooth gloss floor, or takes an aggregate broadcast for a slip-resistant one. The usual epoxy answer for warehouses, workshops, garages and ramps.
01 products
Self-levelling epoxy floor systems
Self-levelling epoxy — the thicker, seamless epoxy floor system for where a roller-applied coating is not enough. Solvent-free and 100% solids, it flows out level for production areas, clean rooms, warehouses and loading bays.
01 products
Polyurethane-cement systems
Heavy-duty polyurethane-cement screeds for food and beverage, chemical processing and thermal-shock environments.
View this complete familyDefine the service surface, appearance and exposure resistance required for the project.
06 products
Polyurethane finishes
Polyurethane and hybrid urethane finishes engineered for UV stability, flexibility and abrasion resistance.
02 products
Water-based & low-odour systems
Water-based epoxy coatings and primers for occupied buildings and projects where low odour matters.
01 products
Sports & court coatings
Acrylic sports-surface coatings for courts and recreational areas — colour-stable, consistent bounce, outdoor-ready.
Create continuous membranes for roofs, wet areas, tanks and containment structures.
08 products
Waterproofing membranes
Seamless liquid-applied waterproofing membranes — a one-part water-based membrane for tiled toilets, bathrooms and balconies, a one-part acrylic for pitched and tiled roofs and external walls with its own acrylic primer, cold roller-applied and hot spray-applied polyureas for roofs, decks, tanks and containment structures, and a latex additive that waterproofs and strengthens cement renders, screeds and tile beds.
Address anti-slip and static-control requirements with purpose-built system components.
01 products
Anti-slip systems
Anti-slip primers, fillers and textured finishes that keep ramps, wet areas and walkways safe underfoot.
01 products
Static-control flooring
Conductive epoxy flooring for ESD-protected areas — a self-smoothing, permanently conductive wearing surface for electronics manufacturing, data centres and other static-sensitive environments.
Narrow by substrate, chemistry, application, industry or performance — or search a product name or code directly.
Choose the closest condition to narrow the range immediately. The complete technical filters remain available for a more precise shortlist.
Solvent-free · damp tolerant
Rayson PrimeBond E20 is a two-component, medium-viscosity, solvent-free epoxy bonding primer that anchors resin floor systems to concrete, screed, asphalt and prepared metal — on dry or damp substrates.
For highly absorbent substrates
Rayson PrimeBond E25 is a two-component, medium-viscosity, solvent-free epoxy bonding primer for dry or damp substrates — formulated to wet out and anchor to highly absorbent concrete, screed, asphalt and prepared metal.
Two-part · 2 × 10 L kit
Rayson PrimeBond S30 is a two-part, low-viscosity, solvent-based epoxy primer that penetrates and seals prepared concrete, pavements and mineral substrates before coating.
Single-pack · water-based
Rayson PrimeBond W10 is a one-component, water-based acrylic primer, sealer and bonding agent for smooth concrete and mineral substrates, applied ahead of Rayson UraForce water-based topcoats.
Smooth or anti-slip finish
Rayson FloorGuard R50 is a two-component, solvent-free high-solids epoxy floor coating that cures to a smooth gloss — or a slip-resistant finish when broadcast with aggregate — for concrete and screed under normal to medium-heavy wear.
Self-priming · water-based
Rayson HydroShield WE40 is a two-component, water-based epoxy used as a self-priming primer-and-topcoat system on concrete, screed, asphalt and metal — including damp surfaces.
Floors, walls & difficult details
Rayson HydroShield WE45 is a two-component, water-based epoxy primer-and-topcoat system for concrete, screed, asphalt and metal — covering duties from warehouse floors to rubbish chute coatings.
Self-smoothing · solvent-free
Rayson LevelShield SL120 is a solvent-free, two-component, self-smoothing epoxy floor system that delivers a seamless wearing surface with medium to heavy chemical resistance and high mechanical strength.
Conductive ESD flooring
Rayson StaticGuard CX90 is a two-component, solvent-free conductive epoxy flooring that gives ESD-protected areas a self-smoothing, permanently conductive, chemically resistant wearing surface.
1.5–3 mm · four-part system
Rayson PurScreed PC70 is a four-part, water-based polyurethane-cement self-smoothing screed installed at 1.5–3 mm for medium to heavy-duty industrial floors with high chemical resistance.
UV-stable polyurethane finish
Rayson UraForce SB72 is a two-component, solvent-based polyurethane floor finish that holds its colour and high gloss under strong UV while resisting abrasion and a broad range of chemicals.
Two-part · 4 L + 1 L
Rayson UraForce SB65 is a two-component, solvent-based aliphatic polyurethane clear topcoat with excellent abrasion resistance, non-yellowing behaviour and outstanding weather durability for concrete, metal and stone.
Water-based polyurethane finish
Rayson UraForce WB58 is a two-component, water-based aliphatic polyurethane dispersion topcoat, crosslinked with a PUR hardener, for abrasion-resistant coloured finishes on concrete, metal and mineral surfaces.
Water-based polyurethane finish
Rayson UraForce WB60 is a two-component, water-based aliphatic polyurethane dispersion clear coat, crosslinked with a solvent-free hardener, giving a non-yellowing, abrasion-resistant finish in gloss, satin or matt.
Single-pack · 24 kg
Rayson UraForce HY15 is a single-component, water-based hybrid urethane — a self-crosslinking acrylic-copolymer-enhanced polyurethane — that roller-coats concrete and mineral surfaces with a fast-drying, stain-resistant, anti-slip finish.
Water-based polyurethane finish
Rayson UraForce WB52 is a two-component, water-based aliphatic urethane floor topcoat — low-VOC, low-odour and UV-resistant — that can be combined with broadcast aggregate for an anti-slip finish.
Purpose-built anti-slip system
Rayson GripSafe AP12 is a one-pack, self-crosslinking acrylic primer filler loaded with 0.5–1.5 mm silicate quartz aggregate that builds an anti-slip texture directly onto concrete and asphalt.
Three-part · 33 kg kit
Rayson MortarBond EM90 is a three-pack, solvent-free epoxy mortar — resin, hardener and graded aggregate — that reinstates concrete floors with a non-shrink, highly abrasion-resistant repair.
Two-part epoxy repair system
Rayson PatchBond TX80 is a two-component, solvent-free thixotropic epoxy adhesive and repair compound with exceptional sag resistance that bonds and fills on vertical, overhead and even mat-damp concrete surfaces.
Outdoor acrylic court finish
Rayson CourtFlex AC25 is a single-component, water-based, self-crosslinking acrylic co-polymer coating for sports courts and decorative concrete and masonry surfaces, forming a stain-resistant, easy-to-clean film.
Two-component kit · 5.25 or 21 kg
Rayson SealForce RC40 is a two-component, cold-applied aliphatic polyurea waterproofing membrane for exposed roofs — roller-, brush- or spray-applied, UV-stable and walkable, with certified cool-roof reflectance.
Two-part · 25 kg + 1.5 kg
Rayson SealForce RC30 is a two-component, roller-applied polyurea-based liquid waterproofing membrane — highly elastic and hydrophobic, bonding strongly to concrete, tile, metal and asphalt for wet areas, roofs and car parks.
Fast-curing spray polyurea
Rayson SealForce SP200 is a hot spray-applied, 100% solids, rapid-curing pure polyurea membrane that forms a seamless, chemically resistant waterproof and protective lining on concrete and steel.
Two-component kit · 400 L
Rayson SealForce SP210 is a hot spray-applied, 100% solids pure polyurea membrane that forms a seamless, potable-grade waterproof lining on concrete and steel tanks, reservoirs and containment structures.
One-part · water-based · 20 kg
Rayson SealForce WB20 is a one-part, water-based, polyurethane-modified waterproofing membrane for toilets, showers, bathrooms, balconies and other interior wet areas — rolled or brushed on in two coats and concealed beneath the tiles, screed or render.
One-part acrylic · 20 kg
Rayson SealForce AC10 is a one-part, water-based acrylic waterproofing membrane for exposed roofs, old roof tiles and external walls — applied cold, straight from the pail, by brush, roller or airless spray, and drying to a seamless, elastic, UV-resistant film.
Acrylic primer · 20 kg
Rayson SealForce AP05 is a one-part, water-based acrylic primer for the SealForce waterproofing range — brushed or rolled onto concrete, render, brick, stone and roof tiles to seal pores, bind dust and give SealForce AC10 a firm surface to bond to.
Latex additive · 20 kg
Rayson SealForce RW1 is a one-part latex waterproofing and bonding additive for cement-based work — mixed into renders, screeds, slurry coats, tile adhesives and grout to cut water penetration, strengthen the mortar and improve its bond and flexibility.
No products match the current filter combination. Ask the technical team to shortlist a system.
Ten of the 28. FloorGuard R50 is the roller-applied epoxy floor coating, LevelShield SL120 the self-levelling epoxy, PrimeBond E20, E25 and S30 the epoxy primers, MortarBond EM90 and PatchBond TX80 the epoxy repair mortar and patching compound, StaticGuard CX90 the conductive epoxy finish, and HydroShield WE40 and WE45 the water-based epoxies.
Daily forklift traffic normally calls for a self-levelling epoxy such as Rayson LevelShield SL120 over a PrimeBond E20 primer, which gives a seamless, high-strength wearing surface. Lighter storage and pallet-truck areas can use a roller-applied epoxy like FloorGuard R50 at lower cost.
Choose epoxy for ambient-temperature floors with inorganic chemistry; it is harder and more economical. Choose polyurethane-cement, such as Rayson PurScreed PC70, when the floor faces hot wash-down, steam or organic acids, because epoxy can crack or soften under thermal shock.
Yes. Every Rayson product has a full technical data sheet published openly on this site — no form, no email address, no gating. You can read the coverage rates, mixing ratios, cure times and limitations before you contact anyone.
Rayson formulates and specifies 28 products across 11 families in Singapore, made to that specification by its production partners and released batch by batch in Singapore, covering epoxy, polyurethane, polyurethane-cement, polyurea, polyurethane-modified, water-based epoxy and acrylic chemistries — from primers and repair mortars to body coats, finishes, waterproofing membranes, anti-slip and static-control systems.
The substrate and its condition, the floor area, the traffic and chemical exposure it faces, any wash-down or temperature cycles, and the shutdown window available for installation. Photographs of the existing surface usually answer more questions than a written description.
SealForce WB20 — a one-part, water-based, polyurethane-modified membrane rolled on in two coats beneath the tiles of toilets, showers, bathrooms and balconies, with no primer and no mixing. For decks, roofs and heavier-duty wet areas the two-component polyurea membranes SealForce RC30 and RC40 take over. Every membrane has its technical data sheet published openly.
Send the substrate photos, area, exposure and available shutdown window. The Rayson team will help define a system direction around real project conditions.
Replies during Singapore working hours: Monday to Friday, 8.30am–5pm.
Rayson assistant
Answers from Rayson's own product information
Guidance only — confirm specifications with the Rayson technical team.